Announcement

Collapse
No announcement yet.

Luminix Jeep Head lamp - Low/High beam backwards, part# 12015 / 12016 / 12017

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Luminix Jeep Head lamp - Low/High beam backwards, part# 12015 / 12016 / 12017

    Hello community!

    Here is some information that you might find useful.

    If the Low beams & High-beams are reversed when you install these, follow the instructions below to get these corrected.

    -Just swap the red wire with the blue wire at the plug of the light (picture 1).
    -Depress the tabs, then push the pin out through the back of the plug, then swap the red and blue pins (Picture 2)


    NOTE:
    This should work with the 3 versions available Part#12015, 12016 and 12017


    Click image for larger version

Name:	image_41.jpg
Views:	117
Size:	109.3 KB
ID:	85

    Click image for larger version

Name:	image_42.jpg
Views:	51
Size:	172.5 KB
ID:	133



    I hope this helps somebody!


    #2
    Thank you for sharing!

    Comment

    Working...
    X