Announcement

Collapse
No announcement yet.

Nitro-Lux LED low beam headlight bulb

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Nitro-Lux LED low beam headlight bulb

    We are attempting to install Nitro-Lux LED's (sku: 700011) into the low beam projector housing of a 2018 Toyota Highlander Limited (original from factory is halogen). Finally, we have been able to get the Nitro-Lux correctly mounted into the housing, however, the dust cover cannot be replaced without some modification with a dremel tool. The bulb assembly protrudes too far out the back of the housing. After modifying the dust cover a little, we are able to force it back into place at the rear of the housing. Again, however, the dust cover is tightly against the back of the bulb assembly preventing any adjustment of the beam (up or down...or side to side). We believe the dust cover is so tight against the rear of the bulb housing that in addition to preventing adjustment it also is pushing to bulb off alignment. WHAT IS THE ANSWER?? Is the Nitro-Lux Pro Zero any different in dimensions from the plain Nitro-Lux so it may fit. HELP!!!!
Working...
X